Construction of Turkish baths, turnkey hammam

What does the cost of a hammam consist of?

Have you decided to start building a hammam?
The issue of cost needs to be studied in more detail. The final price of the property depends on many factors. Size plays an important role, this is logical - the larger the Turkish bath, the more consumables. In our practice, we have encountered small-sized hammams in apartments and spacious baths in private houses, measuring 5x6.5x4 m. Construction prices start from 420,000 rubles - the final price is calculated after the design stage of the Turkish bath.

The price is also affected by the complexity of the layout and configuration of the hammam, equipment, materials for interior and exterior decoration. To reduce the cost, customers sometimes choose budget equipment. Such a decision must be deliberate, because often cheap components quickly break down during frequent use, require replacement, and end up being more expensive.

Experience shows that there is no need to go to extremes; you can install equipment in the mid-price category. Our company’s specialists will help you understand all the intricacies and choose the appropriate option.

Let's look at an example of how much it will cost to build a hammam. We take an average size of 2.5x2.5x2.5 m. The object includes a basic set of equipment, in particular:

• Steam generator Harvia (Finland) with control panel
• Glass door in aluminum frame
• Spotlights in the amount of 4 pcs.
• Ventilation system with condensate drain
• Heating system for walls, floors, benches
• Mosaic cladding

The cost of such a hamam will be 570,000 rubles.

II. Technical requirements, selection of equipment for the construction of a Turkish bath, hammam.

It must be borne in mind that the Turkish hammam is a complex technical unit and requires strict adherence to construction and technological standards

process, the following are suitable for the premises of a Turkish bath

communications such as: (water supply, electricity, steam supply system, sewerage, ventilation, audio), which should be located in plain sight in a special technical room for equipment. It is recommended to visually inspect power devices 2-3 times a year, tighten the contact group and flush the steam generator with a special solution to remove accumulated scale. The technical room for placing the necessary equipment (steam generator, water heating...) is planned in advance; it can be located on the floor above (above the steam room) or on the floor below (in the basement), but so that the length of the steam line does not exceed 6-8 m.p. It is not necessary to have a full-fledged technical room; very often all equipment (steam generator, heating system, step-down transformers...) can be placed near the entrance to the bathhouse, later covered with a decorative cabinet. Very often in modern country house projects, areas are allocated for the construction of a steam bath - hammam, but at the same time they forget to design those. room for the necessary equipment. And this is not such a big problem - from you the desire and opportunity to implement construction, from us - a competent, convenient, safe location of everything necessary.

III. What equipment and materials to choose for the construction of a Turkish bath structure.

Separate attention should be paid to the materials from which the structure of the Turkish hammam itself is built. In addition to strength, moisture resistance and good thermal insulation properties, they must be environmentally friendly and durable. In the process of building a Turkish bath, we use hard foam panels coated on both sides with a special waterproofing composition, both from an imported manufacturer - LUX ELEMENTS ® (Germany) and from a domestic one - TEPLOFOM, which allow you to create complex geometric shapes and meet all the requirements and standards for modern building materials. When constructing walls, ceilings, and loungers of a Turkish bath, this material has proven its suitability and durability over the years. In addition to structural panels, the heart of a modern hammam is a steam generator, which maintains the desired temperature and humidity conditions in the bathhouse. For the construction of saunas and Turkish baths, steam generators from TYLO (Sweden), PAROMAX (RUSSIA), HELO (Finland), Harvia (Finland) have proven themselves very well. An important element of any oriental bath (hammam) is a kurna (water bowl) and two separate bronze taps above it. It creates a special flavor and emphasizes the chosen style of bathhouse (hamam). Most often, the kurna is made of natural stone (marble, onyx, granite), or in a construction version of any shape for finishing with mosaic cladding. To get maximum pleasure from the bath procedure, you need to douse yourself with water from time to time.

Recommendations for the customer of hamam construction

• The final cost of the hammam may vary. Therefore, we approach each project individually and try to do it as best as possible. Even if the budget is limited, this does not mean that you will get an inconvenient building that will only half perform its functions. We take into account wishes in the process of designing a Turkish bath, we are able to hear and understand the customer. The final cost of the hammam will be announced at the project approval stage. At this point, you can make adjustments, remove or add something for maximum customer comfort.
• You need to approach the choice of equipment responsibly, because a hammam is not an ordinary building, but a health-improving facility. Our specialists will help you select systems that fully meet the specified criteria.
• The cost formation is influenced by the location of the cottage where the hammam is planned to be built - the farther it is from the city, the more expensive it is. Despite the geographical remoteness, there is no need to worry about the delivery of materials and equipment - this is our concern. The company has everything necessary to implement projects not only in a neighboring city, but also in another country.

Selection of building materials

In the classic version, stone is chosen for the construction of a hammam bath, and natural granite is used for interior decoration. Nowadays, on the construction market you can choose many modern materials, which in their qualities are as close as possible to the traditional version.

It must be taken into account that the material for the hammam must have:

• high strength characteristics;
• moisture resistance;
• resistance to high thermal conditions;
• environmental friendliness.

For the construction of external walls, brick or stone is traditionally used, which are successfully replaced with foam concrete blocks. The ideal solution would be to install a Turkish bath in the premises of the cottage, then there will be no need to build foundations, erect walls and install a roof, and connecting to communications will be much simpler and cheaper.

The inside of the hammam is decorated with marble tiles or stone. Recently, modern finishing materials that are not inferior to them in their properties have been very successfully used: glass mosaic and ceramic tiles.

What does the customer receive by contacting Hamam-M?

If you have long dreamed of a Turkish hammam, it’s time to take action. The first step to take is to call us. Specialists will listen to your wishes, give advice from a professional point of view, and find the optimal solution, taking into account the budget.

We have established relationships with suppliers, so using the services of our company is more profitable than building a Turkish bath yourself without experience and professional knowledge.

By contacting us, you can resolve any issues related to construction.

How to build a Turkish bath

To ensure the durability and safety of the building, the company follows the following rules:

• Use materials adapted for use in aggressive environments. Don't forget that the bathhouse is always hot and humid.

• To maintain optimal temperature conditions, it is necessary to equip the Turkish bath with the correct waterproofing. It should be triple. This is the only way to count on economical heat consumption.

• The equipment installed in the bathhouse is high quality and modern. Such equipment allows you to create the right microclimate. It is equally important to get the right lighting to feel comfortable. It must be adjustable.

• For proper air circulation and maintaining optimal temperature conditions, even the ceiling must be properly equipped. It should be dome-shaped.

Functional Features

Modern baths, for the most part, are equipped with a steam generation system.

Scheme of operation of the steam generation system

The nozzles located under the sun loungers are designed to supply steam directly to the steam room. Water is supplied to special bowls (kurns) equipped with taps. The drain into the sewer must have a drain so that unpleasant odors do not spoil your stay in the steam room.

For water treatments, not only kurnas are used; you can also provide a “tropical rain” shower, with which you can rinse off without leaving the hararet.

The sunbeds and massage table are made of brick, having previously been heated. Their dimensions will depend on the size of the room, but despite this, there are recommendations for a massage podium with a height of about 800 mm.

A little history

We are accustomed to attributing hammam to the fruits of the activities of the Turks, however, this is not entirely true. The founders of Turkish baths are the ancient Romans. The Arabs became mediators between Turkey and the Roman Empire, conveying the principles of building hammams.

Turkish steam rooms were first mentioned about eight hundred years ago. The oldest steam rooms, which most accurately reflect traditions and culture, are located in Istanbul, and it is not surprising, because according to the chronicles, this is where the Turkish calling card, the hammam, originates.

Detailed layout of a Turkish hammam bath
It should be noted that such prevalence is determined by religious concepts, which state that “cleanliness is half of faith.” A Turkish bath allows you to truly relax both soul and body. A warm atmosphere (precisely warm, not hot) along with optimal humidity and spicy aromas will allow you to forget about the routine bustle and plunge into oriental flavor.

Design development in the style of the Ottoman Empire

The decoration of Turkish baths is a unique ensemble of geometric patterns and ornaments.
Every line and figure of the hammam is thought out to the smallest detail. This approach allows you to relax truly like an emperor. The peace of mind acquired in the hammam makes it possible to relax, cleanse yourself and prepare for new achievements and actions. Oriental patterns in the decoration concentrate the energy of the cosmos, absorbed with essential oils. Spa treatments allow muscles to get rid of overstrain. Tone brings confidence and strength. Add here oriental sweets, drinks and friendly conversation. Oriental mosaic is a classic, but not a panacea. Lovers of modern forms, trends, and design styles realize their fantasies on a par with conservatives. Angularity, roundness, irregular figures - everything can be done with the participation of the Hamam Stroy studio. The geometry of the room does not have to be square. Round, oval, triangular - it doesn't matter. The restorative effect will remain in any case.

All kinds of materials are used: • marble; • ceramics; • glass; • rare wood species. The finishing depends on your preferences: the shape of sun loungers, shelving, benches, seats, lamps, and other items (functional and decorative). The beauty of the decoration reaches the point of outright chic. The purpose of the hammam is to provide bodily and aesthetic pleasure. The shine of the finish will give the interior a ceiling that imitates the night sky. The twinkling lights will make you feel like you are under an open “starry pond”. A domed ceiling will expand the space to infinity. This is not his only task. Since ancient times, a method for draining condensate has been invented. Its collection and subsequent rainfall on the head is impossible due to the sloping shape of the ceiling. It flows in languid streams, adding an atmosphere of peace with intricate natural patterns.

Decorating Turkish baths is a creative process, bordering on art. The most daring and eccentric ideas are implemented by Hamam Stroy specialists. They will select materials that are resistant to temperature changes and high humidity. The finish will last as long as needed.